Study of Synthesis and Pigment Characteristics of the Composition of Copper Phthalocyanine with Terephthalic Acid

Study of Synthesis and Pigment Characteristics of the Composition of Copper Phthalocyanine with Terephthalic Acid

  IJETT-book-cover           
  
© 2022 by IJETT Journal
Volume-70 Issue-8
Year of Publication : 2022
Authors : Dilmurod Nabiev, Khayit Turaev
DOI : 10.14445/22315381/IJETT-V70I8P201

How to Cite?

Dilmurod Nabiev, Khayit Turaev, "Study of Synthesis and Pigment Characteristics of the Composition of Copper Phthalocyanine with Terephthalic Acid," International Journal of Engineering Trends and Technology, vol. 70, no. 8, pp. 1-9, 2022. Crossref, https://doi.org/10.14445/22315381/IJETT-V70I8P201

Abstract
Dyes are currently one of the most valuable synthetic chemical compounds. Such compounds must have a stable colour and resist external influences. Among them, phthalocyanines are stored in different groups and metals and have a special place. The paper presents the synthesis of a direct compound of copper phthalocyanine with terephthalic acid added during industrial extraction. The optimal time of the compound synthesis process has been determined to be 2 hours and the temperature to be 185 °C. The composition of the compound has been confirmed by element analysis and IR-spectroscopy methods. Based on SEM images, the compound was found to be homogeneous. The obtained compound has been tested for compliance with standard pigment requirements. Enamel containing 11% of the appropriate pigment corresponds to blue industrial enamel, and its properties such as gloss, viscosity, drying time, elasticity, adhesion, resistance to water and temperature have been studied. Thermal analysis of the pigment shows that the main decomposition process is between 300 °C and 339 °C, and the maximum decomposition reaches up to 70%. Thermal analysis of the prepared enamel revealed that the basic decomposition exceeds 300 °C and the loss at 400 °C is around 44%. The resulting pigment can be used as an effective dye for painting various surfaces and colouring plastics.

Keywords
Pigment, Dye, Terephthalic acid, Copper, IR spectroscopy, Thermal analysis.

Reference
[1] G. Germinario, I.D.Van Der Werf, L. Sabbatini, “Pyrolysis Gas Chromatography-Mass Spectrometry of Two Green Phthalocyanine Pigments and their Identification in Paint Systems,” J. Anal. Appl. Pyrolysis., Elsevier, vol. 155, pp. 175-183, 2015.
[2] Y.A. Mikheev, L.N.Guseva, Y.A.Ershov, “The Nature of Chromaticity of Triphenylmethane, Xanthene, Phthalocyanine, and Thiazine Dyes,” Russ. J. Phys. Chem., vol. 84, no. 10, pp. 1778-1791, 2010.
[3] Y.A.Mikheev, L.N. Guseva, Y.A.Ershov, “Vibronic Spectra of Solutions and Sols of Copper Phthalocyanine,” Russ. J. Phys. Chem. A. Springer, vol. 81, no. 4, pp. 617-625, 2007.
[4] H.S.Kim et al., “Synthesis and Characterization of Water-Soluble Phthalocyanine Copper(II) Complex and its Colouration on Acrylic Fibres,” Fibers Polym, Springer, vol. 16, no. 12, pp. 2552-2557, 2016.
[5] V.E. Maizlish, T.A.Martynyuk, G.P.Shaposhnikov, “Preparation and Properties of Copper Tetra-4-[(4′-carboxy) Phenylamino] Phthalocyanine,” Russ. J. Gen. Chem. Springer, vol. 84, no. 1, pp. 131-136, 2014.
[6] E.A.Venediktov, E.Y.Tulikova, V.E.Maizlish, “Photogeneration of Singlet Molecular Oxygen (1O2, 1Δ g ) using Monomeric and Aggregated Forms of Copper Tetra-4-(Morpholine-4-Yl)-Tetra-5-(2-Naphthoxy) Phthalocyanine in Organic Solvents,” Russ. J. Gen. Chem., Springer, vol. 82, no. 6, pp. 1145-1152, 2012.
[7] W.He et al., “Synthesis and 1.1 μm Near-Infrared Electrophosphorescence Properties of Phenoxy-Substituents Copper Phthalocyanine,” Russ. J. Inorg. Chem. Springer, vol. 54, no. 3, pp. 407-412, 2009.
[8] A.S.Malyasova et al., “Synthesis, Acid-Base Interactions, and Photostability of Copper(Ii) Tetrakis (3,5-Di-Tert-Butylbenzoyloxy) Phthalocyanine,” Russ. Chem. Bull. Springer, vol. 70, no. 12, pp. 2405-2415, 2022.
[9] A.A.Botnar et al., “Metal Complexes of Tetrakis (2-Carboxyphenylsulfanyl) Phthalocyanine, Synthesis, Spectral And Catalytic Properties,” Russ. Chem. Bull. Springer, vol. 70, no. 7, pp. 1297-1303, 2021.
[10] R. Signerski, G. Jarosz, “Effect of Buffer Layers on the Performance of Organic Photovoltaic Devices Based on Copper Phthalocyanine-Perylene Dye Heterojunction,” Opto-Electronics Rev. Springer, vol. 19, no. 468-473, 2011.
[11] K.Nauka, H.T. Ng, E.G. Hanson, “Interpretation of the C1s XPS Signal in Copper Phthalocyanine for Organic Photovoltaic Device Applications,” MRS Online Proc. Libr. Springer, vol. 1270, no. 1, pp. 1-4, 2010.
[12] A.Y.Tsivadze, L.A.Nosikova, Z.A.Kudryashova, “Liquid-Crystalline Phthalocyanine-Based Nanostructures,” Prot. Met. Phys. Chem. Surfaces Springer, vol. 48, no. 2, pp. 135-157, 2012.
[13] U.Olgun et al., “Nano-Gold-Based Synthesis, Characterization and Band Gap Energies of Gold(III)-2(3)-Tetrakis(Allyloxy)- Substituted Phthalocyanine and Gold(III)-Phthalocyanine Dyes,” J. Mater. Sci. Mater. Electron. Springer, vol. 32, no. 11, pp. 15011- 15025, 2021.
[14] M.H.Moinuddin Khan et al., “Synthesis, Structural Investigations and Biological Studies on Symmetrically Substituted 3,3′,3",3"′- Tetra-Methoxyphenylimino Phthalocyanine Complexes,” Russ. J. Inorg. Chem. Springer, vol. 53, no. 1, pp. 68-77, 2009.
[15] G.Xiong et al., “In-Situ Synthesis of Copper Phthalocyanine in Silica Xerogel Matrix,” J. Sol-Gel Sci. Technol. Springer, vol. 18, no. 1, pp. 21-27, 2000.
[16] B.Tawiah et al., “Phthalocyanine Green Aluminium Pigment Prepared by Inorganic Acid Radical/Radical Polymerization for Waterborne Textile Applications,” Int. J. Ind. Chem. Springer Berlin Heidelberg, vol. 8, no. 1, pp. 17-28, 2017.
[17] M.Takasu et al., “Preparation of Coloured Latex Containing Oil-Soluble Dyes with High Dye Content by Mini-Emulsion Polymerization,” Colloid Polym. Sci. Springer, vol. 282, no. 2, pp. 119-126, 2003.
[18] J. Su et al., “Dissolution of Copper Phthalocyanine and Fabrication of its Nano-Structure Film,” Sci. China Ser. B Chem. Springer, vol. 55, no. 7, pp. 911-915, 2009.
[19] V.N.Andreev, E. V.Ovsyannikova, N.M. Alpatova, “Immobilization of Phthalocyanines in Conducting Polymers, Polyaniline-Copper Tetrasulfophthalocyanine,” Russ. J. Electrochem. Springer, vol. 46, no. 9, pp. 1056-1062, 2010.
[20] K.Nauka et al., “Surface Molecular Vibrations as a Tool for Analyzing Surface Impurities in Copper Phthalocyanine Organic Nanocrystals,” MRS Online Proc. Libr. Springer, vol. 1270, no. 1, pp. 1-4, 2010.
[21] A. El-Refaey et al., “A Light Harvesting Perylene Derivative–Zinc Phthalocyanine Complex in Water: Spectroscopic and Thermodynamic Studies,” Photochem. Photobiol. Sci. Springer, vol. 16, no. 6, pp. 861-869, 2020.
[22] W.Chen et al., “Study on Catalytic Oxidation of Planar Binuclear Copper Phthalocyanine on 2-Mercaptoethanol,” Sci. China Ser. B Chem. Springer, vol. 46, no. 6, pp. 522-526, 2006.
[23] A.Heinfling, M.Bergbauer, U. Szewzyk, “Biodegradation of Azo and Phthalocyanine Dyes by Trametes Versicolor and Bjerkandera Adusta,” Appl. Microbiol. Biotechnol. Springer, vol. 48, no. 2, pp. 261-266, 1997.
[24] Z.Navaei, M.A.Zanjanchi, “Synthesis of an Efficient Photocatalyst by Incorporating Phthalocyanine into KIT-6,” SN Appl. Sci. Springer Nature, vol. 2, no. 6, pp. 1-14, 2020.
[25] A. V.Velichko, L.B.Pavlovich, L.A.Samigulina, “Synthesizing Copper and Cobalt Phthalocyanines Based on Coke-Plant Wastes,” Coke Chem. Springer, vol. 55, no. 5, pp. 179-183, 2012.
[26] A.S.Vaze, V.G.Pangarkar, N.P.Manathkar, “A Proposed Process Scheme for Recovering Metal Values from Pigment Manufacturing Waste Streams,” Clean Prod. Process. Springer, vol. 1, no. 1, pp. 49-51, 1998.