Wear mechanism map for ascast AZ31B magnesium alloy

Wear mechanism map for as-cast AZ31B magnesium alloy

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2016 by IJETT Journal
Volume-38 Number-4
Year of Publication : 2016
Authors : E. Ilanaganar, S. Anbuselvan
DOI :  10.14445/22315381/IJETT-V38P239

Citation 

E. Ilanaganar, S. Anbuselvan"Wear mechanism map for as-cast AZ31B magnesium alloy", International Journal of Engineering Trends and Technology (IJETT), V38(4),218-222 August 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
In present work, the wear behaviour of ascast AZ31B magnesium alloy during dry sliding conditions has been investigated. The experiments were carried out using pin-on-disc type wear apparatus against a steel disc counterface in an applied load range of 10-50 N, sliding velocity range of 0.1-0.9 m/s and at a constant sliding distance of 1000 m. The wear mechanism map was drawn. The dominant wear mechanisms were identified in each wear regime. .Microstructural characterization results established different mechanisms at different sliding conditions, namely, abrasion, oxidation, delamination, plastic deformation and melting.

 References

1. Chen Dong-feng, Dong Xuan-pu, Znang Xiong, and Fan Zitian, Mg alloy surface alloying layer fabricated through evaporative pattern casting technology, Transactions of Nonferrous Metals Society of Chinna, 2010, vol. 20, pp. 2240-2245.
2. M.N. Mekonen, D. Steglich, J. Bohlen, D. Letzig, and J. Mosler, Mechanical character- ization and constitutive modeling of Mg alloy sheets, Mater Sci Eng A, 2012, vol. 540, pp. 174–86.
3. C. Taltavull, B. Torres, A.J. Lo´ pez, and J. Rams, Dry sliding wear behavior of AM60B magnesium alloy, Wear, 2013, vol. 301, pp. 615-25.
4. Q.B. Nguyenn, Y.H.M. Sim, M.Gupta, and C.Y.H. Lim, Tribology characteristics of magnesium alloy AZ31B and its composites, Tribology International, 2015, vol. 82, pp, 464– 471
5. C. Taltavull , P. Rodrigo, B. Torres, A.J. Lo´ pez, and J. Rams, Dry sliding wear behavior of AM50B magnesium alloy, Materials and Design, 2014, vol. 56, pp. 549–556.
6. A. Zafari, H.M. Ghasemi , and R. Mahmudi, Tribological behavior of AZ91D magnesium alloy at elevated temperatures, Wear, 2012, vol. 292–293, pp. 33–40.
7. A.J. López, P. Rodrigo, B. Torres, and J. Rams, Dry sliding wear behaviour of ZE41A magnesium alloy, Wear, 2011, vol. 271, pp. 2836– 2844.
8. Q.B. Nguyen, and M. Gupta, Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates, J Alloys Compd, 2008, vol. 459, pp. 244-50.
9. S.M. Hsu, and M.C. Shan, Ceramic wear maps, Wear, 1996, vol. 200, pp. 154-75.
10. H. Chen, and A.T. Alpas, Sliding wear map of AZ91 magnesium alloy, Wear, 2000, vol. 246, pp. 106-16.
11. S.C. Lim, The relevance of wear–mechanism maps to mild– oxidational wear, Tribol Int, 2002, vol. 35, pp. 717-23.
12. J. Zhang, and A.T. Alpas, Transition between mild and severe wear in Aluminium alloys, Acta Mater, 1997, vol. 45, pp. 513-28.
13. J. Jing, B.I. Guangli, Z. Lei, L.I. Rongguang, L. Jianshe, and J. Zhonghao, Journal of Rare Earths, 2015, vol. 33, pp. 77- 85.
14. J. An, R.G. Li, Y. Lu, C.M. Chen, Y. Xu and X. Chen, Dry sliding wear behavior of magnesium alloys, Wear, 2008, vol. 265, pp. 97–104.
15. C.Y.H. Lim, S.C. Lim and M. Gupta, Wear behaviour of SiCp-reinforced magnesium matrix composites, Wear, 2003, vol. 255, pp. 629–37.

Keywords
Magnesium alloy; Dry sliding wear; Wear map; Wear mechanism.