Design and CFD Analysis of Bifurcation of Pelton Turbine Hydraulic Losses and Provoke Velocity for the Nozzle
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2019 by IJETT Journal | ||
| Volume-67 Issue-9 |
||
| Year of Publication : 2019 | ||
| Authors : Sase Negash We/Gebriale |
||
| DOI : 10.14445/22315381/IJETT-V67I9P202 |
Citation
MLA Style: Sase Negash We/Gebriale "Design and CFD Analysis of Bifurcation of Pelton Turbine Hydraulic Losses and Provoke Velocity for the Nozzle" International Journal of Engineering Trends and Technology 67.9 (2019):8-15.
APA Style:Sase Negash We/Gebriale. Design and CFD Analysis of Bifurcation of Pelton Turbine Hydraulic Losses and Provoke Velocity for the Nozzle International Journal of Engineering Trends and Technology, 67(9),8-15.
Abstract
Pelton turbines are a type of hydraulic turbine in which energy carried by water are converted into kinetic energy through nozzles at the end of the distributer. The performance of this turbine depends on many factors, about which distributer plays a major components on its performance. Hence, this paper attempts to study the effect of different parameters of the distributer such as the bending radius, split angle, the length and diameter of the distributer and the joint of the distributer on the performance characteristics of the Pelton turbine. The design of the distributer has been ascertain with the flow rate of 0.07 m3/s, with the total head of 50 m and 138-170 mm as diameter. The detail numerical analysis has been determined and real time simulations of the design has been performed by CATIA V5 and Ansys Fluent. The results obtained from the numerical simulation with respect to static pressure, velocity magnitude, and velocity vectors were plotted for all models. The comparison analysis made on the models were based on the colour magnitude on the legend bar of velocity and pressure. From the simulation it has been concluded that, when the diameter of the distributer increase results showed reduction of head losses. However, increasing the diameter of the distributer increase the cost of the pipe and decreases the hydraulic energy inside the nozzle, which affects the flow performance of the turbine, hence an optimal diameter of 142 mm has been ascertain with the above design specifications. Further the optimum split angle and the length of the distributer were analysed and discussed.
Reference
[1] Gatte, M.T. and R.A. Kadhim, Hydro power. Energy Conservation, 2012. 9(51000): p. 95-124.
[2] Rosenthal, M.W., An account of Oak Ridge National Laboratory’s thirteen nuclear reactors. ORNL/TM, 2009. 181
[3] Catanase, A., M. Barglazan, and C. Hora. Numerical simulation of a free jet in Pelton turbine. In Proceedings of the 6th International Conference on Hydraulic Machinery and Hydrodynamics. 2004
[4] Sharma, A., P. Sharma, and A. Kothari, Numerical Simulation for Pressure Distribution in Pelton Turbine Nozzle for the Different Shapes of Spear. International Journal of Innovations in Engineering and Technology, 2012. 1(4)
[5] Walski, T.M., D.V. Chase, and D.A. Savic, Water distribution modeling. 2001
[6] Kaminaka, M., H. Takashima, and K. Kaburagi, Fluid distributor. 1985, Google Patents
[7] Kosnik, L., The potential for small scale hydropower development in the US. Energy Policy, 2010. 38(10): p. 5512-5519
Keywords
Micro-hydro Pelton turbine, Distributer, Bifurcation, Bending radius, Split angle, Joint of distributer, CATIA, Ansys Fluent.