International Journal of Engineering
Trends and Technology

Research Article | Open Access | Download PDF
Volume 74 | Issue 10 | Year 2026 | Article Id. IJETT-V74I10P105 | DOI : https://doi.org/10.14445/22315381/IJETT-V74I10P105

Chloride Resilient Recycled Aggregate Concrete: Optimising Marine Durability through Age Enhanced SCM Integration

Rose Mbugua

Received Revised Accepted Published
18 Nov 2025 02 Jun 2026 16 Sep 2026 27 Oct 2026

Citation :

Rose Mbugua, "Chloride Resilient Recycled Aggregate Concrete: Optimising Marine Durability through Age Enhanced SCM Integration," International Journal of Engineering Trends and Technology (IJETT), vol. 74, no. 10, pp. 56-76, 2026. Crossref, https://doi.org/10.14445/22315381/IJETT-V74I10P105

Abstract

The demand for sustainable construction materials is rising, and Recycled Aggregate Concrete (RAC) is one of the most discussed alternatives to conventional concrete. RAC, however, performs poorly in marine environments because chloride ions from seawater enter through the recycled aggregate and reach the reinforcement faster than in concrete made with natural aggregate, causing corrosion and shortening service life. This study uses a curated dataset of 1030 concrete records from the UCI Machine Learning Repository, extended with 287 marine-exposed records drawn from peer-reviewed studies, to investigate how Supplementary Cementitious Materials (SCMs) and age-dependent hydration influence the chloride resistance of RAC. Statistical analysis is combined with three machine learning algorithms (Random Forest, Support Vector Machine, and Artificial Neural Network) and extended through polynomial regression, Sobol global sensitivity analysis, and Monte Carlo simulation for probabilistic service-life prediction. A simplified Life Cycle Assessment is performed following ISO 14040 and ISO 14044. Replacing 30-50% of natural coarse aggregate with recycled aggregate, combined with 25-35% SCM by mass of binder, produces concrete with compressive strength above 45 MPa, chloride conductivity below 0.5 mS/cm, and a Monte Carlo mean service life beyond 100 years. The optimised mixes meet the durability requirements of ACI 357.3R-14, EN 206 (XS3), and JSCE Standard Specifications. The proposed hybrid mix containing 15% fly ash and 20% slag gives the best overall performance with a 41% reduction in CO2 emissions relative to conventional marine concrete, providing a basis for using RAC in marine infrastructure projects in Africa and other coastal regions.

Keywords

Chloride resistance, Recycled Aggregate Concrete, Supplementary Cementitious Materials, Life cycle assessment, Marine durability, Machine Learning, Monte carlo simulation.

References

  1. P. Kumar Mehta, and P.J. Monteiro, Concrete: Microstructure, Properties, and Materials, 3rd ed., McGraw-Hill, 2006.
    [Google Scholar] [Publisher Link]
  2. Luca Bertolini et al., Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair, Wiley Publisher, 2003.
    [CrossRef] [Publisher Link]
  3. Patrick Karani et al., “Africa Blue Economy Strategies Integrated in Planning to Achieve Sustainable Development at National and Regional Economic Communities,” Journal of Sustainability Research, vol. 4, no. 3, pp. 1-20, 2022.
    [CrossRef] [Google Scholar] [Publisher Link]
  4. UN Environment et al., “Eco-Efficient Cements: Potential Economically Viable Solutions for a Low-CO₂ Cement-based Materials Industry,” Cement and Concrete Research, vol. 114, pp. 2-26, 2018.
    [CrossRef] [Google Scholar] [Publisher Link]
  5. Robbie M. Andrew, “Global CO₂ Emissions from Cement Production,” Earth System Science Data, vol. 10, no. 1, pp. 195-217, 2018.
    [CrossRef] [Google Scholar] [Publisher Link]                        
  6. Rui Vasco Silva, Jorge De Brito, and Ravindra K. Dhir, “Properties and Composition of Recycled Aggregates from Construction and Demolition Waste Suitable for Concrete Production,” Construction and Building Materials, vol. 65, pp. 201-217, 2014.
    [CrossRef] [Google Scholar] [Publisher Link]
  7. Ali Akhtar, and Ajit K. Sarmah, “Construction and Demolition Waste Generation and Properties of Recycled Aggregate Concrete: A Global Perspective,” Journal of Cleaner Production, vol. 186, pp. 262-281, 2018.
    [CrossRef] [Google Scholar] [Publisher Link]
  8. E.L.L.E.N. Macarthur, and H. Heading, “How the Circular Economy Tackles Climate Change,” Ellen MacArthur Foundation, vol. 1, no. 3, pp. 1-71, 2019.
    [Google Scholar] [Publisher Link]
  9. Vivian W.Y. Tam, Mahfooz Soomro, and Ana Catarina Jorge Evangelista, “A Review of Recycled Aggregate in Concrete Applications (2000­­­-2017),” Construction and Building Materials, vol. 172, pp. 272-292, 2018.
    [CrossRef] [Google Scholar] [Publisher Link]
  10. D. Pedro, J. de Brito, and L. Evangelista, “Structural Concrete with Simultaneous Incorporation of Fine and Coarse Recycled Concrete Aggregates: Mechanical, Durability and Long-Term Properties,” Construction and Building Materials, vol. 154, pp. 294-309, 2017.
    [CrossRef] [Google Scholar] [Publisher Link]
  11. Jianzhuang Xiao et al., “An Overview of Study on Recycled Aggregate Concrete in China (1996–2011),” Construction and Building Materials, vol. 31, pp. 364-383, 2012.
    [CrossRef] [Google Scholar] [Publisher Link]
  12. Subhas Chandra Kanaujia et al., “Recycled Concrete Aggregates from Construction and Demolition Waste: A Systematic and Critical Review of a Sustainable Construction Material,” International Journal of Environment, Engineering and Education, vol. 7, no. 2, pp. 84-96, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  13. Nobuaki Otsuki, Shin-Ichi Miyazato, and Wanchai Yodsudjai, “Influence of Recycled Aggregate on Interfacial Transition Zone, Strength, Chloride Penetration and Carbonation of Concrete,” Journal of Materials in Civil Engineering, vol. 15, no. 5, pp. 443-451, 2003.
    [CrossRef] [Google Scholar] [Publisher Link]
  14. Claudio Javier Zega, and Ángel Antonio Di Maio, “Use of Recycled Fine Aggregate in Concretes with Durable Requirements,” Waste Management, vol. 31, no. 11, pp. 2336-2340, 2011.
    [CrossRef] [Google Scholar] [Publisher Link]
  15. Ying Peng et al., “Recycled Aggregates for Sustainable Construction: Strengthening Strategies and Emerging Frontiers,” Materials, vol. 18, no. 13, pp. 1-25, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  16. Tiago Luis Possebon Ortolan et al., “Durability of Concrete Incorporating Recycled Coarse Aggregates: Carbonation and Service Life Prediction under Chloride-Induced Corrosion,” Construction and Building Materials, vol. 404, pp. 1-14, 2023.
    [CrossRef] [Google Scholar] [Publisher Link]
  17. Ammar Younes et al., “Incorporating Coarse and Fine Recycled Aggregates into Concrete Mixes: Mechanical Characterization and Environmental Impact,” Journal of Material Cycles and Waste Management, vol. 26, no. 1, pp. 654-668, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
  18. Miguel Bravo et al., “Durability Performance of Concrete with Recycled Aggregates from Construction and Demolition Waste Plants,” Construction and Building Materials, vol. 77, pp. 357-369, 2015.
    [CrossRef] [Google Scholar] [Publisher Link]
  19. Bin Lei et al., “Effects of Environmental Actions, Recycled Aggregate Quality and Modification Treatments on Durability Performance of Recycled Concrete,” Journal of Materials Research and Technology, vol. 9, no. 6, pp. 13375-13389, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
  20. Bingcheng Chen, Yuxi Zhao, and Ligang Peng, “Long-Term Performance of Recycled Aggregate Concrete Beams Exposed to 10 Years of Loading and Chloride Environments,” Engineering Structures, vol. 333, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  21. Hui Guo et al., “Durability of Recycled Aggregate Concrete: A Review,” Cement and Concrete Composites, vol. 89, pp. 251-259, 2018.
    [CrossRef] [Google Scholar] [Publisher Link]
  22. B. González-Fonteboa et al., “Recycled Concrete with Coarse Recycled Aggregate. An Overview and Analysis,” Building Materials, vol. 68, no. 330, pp. 1-29, 2018.
    [CrossRef] [Google Scholar] [Publisher Link]
  23. Mohsen Mohammadi et al., “Advances in Concrete Demolition Technologies: A Review of Conventional and Emerging Methods for Sustainable Waste Management,” Eng, vol. 5, no. 4, pp. 3174-3191, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
  24. Pacheco-Torgal et al., Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment, Woodhead Publishing, 2020.
    [Google Scholar] [Publisher Link]
  25. Ramala Rakesh Kumar Reddy, and Subhash C. Yaragal, and V.K. Sanjay, “Processing of Laboratory Concrete Demolition Waste using Ball Mill,” Materials Today: Proceedings, pp. 1-7, 2023.
    [CrossRef] [Google Scholar] [Publisher Link]
  26. Marta Sánchez de Juan, and Pilar Alaejos Gutiérrez, “Study on the Influence of Attached Mortar Content on the Properties of Recycled Concrete Aggregate,” Construction and Building Materials, vol. 23, no. 2, pp. 872-877, 2009.
    [CrossRef] [Google Scholar] [Publisher Link]
  27. Zhen Hua Duan, and Chi Sun Poon, “Properties of Recycled Aggregate Concrete Made with Recycled Aggregates with different Amounts of Old Adhered Mortars,” Materials and Design, vol. 58, pp. 19-29, 2014.
    [CrossRef] [Google Scholar] [Publisher Link]
  28. L. Evangelista, and J. de Brito, “Mechanical Behaviour of Concrete Made with Fine Recycled Concrete Aggregates,” Cement and Concrete Composites, vol. 29, no. 5, pp. 397-401, 2007.
    [CrossRef] [Google Scholar] [Publisher Link]
  29. Kanish Kapoor, and Amad Ur Rehman Bohroo, “Study on the Influence of Attached Mortar Content on the Properties of Recycled Concrete Aggregate,” Sustainable Engineering: Proceedings of Egrwse, Springer, Singapore, vol. 30, pp. 337-347, 2019.
    [CrossRef] [Google Scholar] [Publisher Link]
  30. Guoliang Bai et al., “An Evaluation of the Recycled Aggregate Characteristics and the Recycled Aggregate Concrete Mechanical Properties,” Construction and Building Materials, vol. 240, pp. 1-10, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
  31. Amnon Katz, “Properties of Concrete Made with Recycled Aggregate from Partially Hydrated Old Concrete,” Cement and Concrete Research, vol. 33, no. 5, pp. 703-711, 2003.
    [CrossRef] [Google Scholar] [Publisher Link]
  32. Emmanuel E. Anike et al., “Evaluation of Conventional and Equivalent Mortar Volume Mix Design Methods for Recycled Aggregate Concrete,” Materials and Structures, vol. 53, no. 1, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
  33. Marco Pepe et al., “A Novel Mix Design Methodology for Recycled Aggregate Concrete,” Construction and Building Materials, vol. 122, pp. 362-372, 2016.
    [CrossRef] [Google Scholar] [Publisher Link]
  34. Kwesi K. Sagoe-Crentsil, Trevor J. Brown, and Alan H. Taylor, “Performance of Concrete Made with Commercially Produced Coarse Recycled Concrete Aggregate,” Cement and Concrete Research, vol. 31, no. 5, pp. 707-712, 2001.
    [CrossRef] [Google Scholar] [Publisher Link]
  35. Chi Sun Poona, Z.H Shui, and Lik Lam, “Effect of Microstructure of ITZ on Compressive Strength of Concrete Prepared with Recycled Aggregates,” Construction and Building Materials, vol. 18, no. 6, pp. 461-468, 2004.
    [CrossRef] [Google Scholar] [Publisher Link]
  36. Salomon M. Levy, and Paulo Helene, “Durability of Recycled Aggregates Concrete: A Safe Way to Sustainable Development,” Cement and Concrete Research, vol. 34, no. 11, pp. 1975-1980, 2004.
    [CrossRef] [Google Scholar] [Publisher Link]
  37. Zhaoping Song, Shaohua Li, and Qingliang Yu, “Chloride-Induced Mechanical Degradation of Ultra-High Performance Fiber-Reinforced Concrete: Insights from Corrosion Evolution Paths,” Construction and Building Materials, vol. 395, pp. 1-14, 2023.
    [CrossRef] [Google Scholar] [Publisher Link]
  38. Yushuai Zhang et al., “Predicting the Compressive Strength of High-Performance Concrete via the DR-CatBoost Model,” Case Studies in Construction Materials, vol. 21, pp. 1-13, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
  39. Mostafa M. Alsaadawi, Mohamed Kamel Elshaarawy, and Abdelrahman Kamal Hamed, “Concrete Compressive Strength Classification using Hybrid Machine Learning Models and Interactive GUI,” Innovative Infrastructure Solutions, vol. 10, no. 5, pp. 1-29, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  40. G. Elavarasi, and S.R. Sumathy, “Effects of Aggregate-to-Cement Ratios and Water-to-Cement Ratios on Compressive and Tensile Strength of Sand-Modified Porous Concrete,” International Journal of Pavement Engineering, vol. 26, no. 1, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  41. Mohammad Saleh Nikoopayan Tak, Yanxiao Feng, and Mohamed Mahgoub, “Advanced Machine Learning Techniques for Predicting Concrete Compressive Strength,” Infrastructures, vol. 10, no. 2, pp. 1-26, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  42. Md. Habibur Rahman Sobuz et al., “Microstructural Behavior and Explainable Machine Learning Aided Mechanical Strength Prediction and Optimization of Recycled Glass-based Solid Waste Concrete,” Case Studies in Construction Materials, vol. 22, pp. 1-24, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  43. Aqil M. Almusawi et al., “Effect of Cement Content on Compressive and Bonding Strength with Steel Bar Reinforcement,” IOP Conference Series: Materials Science and Engineering, vol. 870, no. 1, pp. 1-8, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
  44. Falah M. Wegian, “Effect of Seawater for Mixing and Curing on Structural Concrete,” The IES Journal Part A: Civil and Structural Engineering, vol. 3, no. 4, pp. 235-243, 2010.
    [CrossRef] [Google Scholar] [Publisher Link]
  45. Shamsad Ahmad, and Saeid A. Alghamdi, “A Statistical Approach to Optimizing Concrete Mixture Design,” The Scientific World Journal, vol. 2014, no. 1, pp. 1-7, 2014.
    [CrossRef] [Google Scholar] [Publisher Link]
  46. V. Preethi et al., “Predicting Mechanical Properties of Glass Fiber Concrete using Response Surface Methodology,” Procedia Structural Integrity, vol. 70, pp. 271-278, 2025.
    [CrossRef] [Google Scholar] [Publisher Link]
  47. Md. Moinul Islam, and Mohammad Rafiqul Islam, Strength Characteristics of Slag Blended Concrete in Marine Environment, 2nd International Conference on Engineering Education for Sustainable Development, World University of Bangladesh, 2009. [Online]. Available: https://www.researchgate.net/publication/360257751_Strength_Characteristics_of_Slag_Blended_Concrete_in_Marine_Environment
  48. Dražan Jozić et al., “The Influence of GGBFS as an Additive Replacement on the Kinetics of Cement Hydration and the Mechanical Properties of Cement Mortars,” Buildings, vol. 13, no. 8, pp. 1-20, 2023.
    [CrossRef] [Google Scholar] [Publisher Link]
  49. Ali Hassan et al., “Partial Replacement of Cement with Fly Ash to Produce Environmental Friendly Concrete,” Pakistan Journal of Geology, vol. 7, no. 1, pp. 32-39, 2023.
    [CrossRef] [Google Scholar] [Publisher Link]
  50. Xiangpeng Cao, and Zongjin Li, Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products from Magnesium Potassium Phosphate Cement Material, 3D Concrete Printing Technology, pp. 211-222, 2019.
    [CrossRef] [Google Scholar] [Publisher Link]
  51. Chi Kang Loke et al., “Non-Destructive Evaluation of Mortar with Ground Granulated Blast Furnace Slag Blended Cement using Ultrasonic Pulse Velocity,” Materials, vol. 15, no. 19, pp. 1-16, 2022.
    [CrossRef] [Google Scholar] [Publisher Link]
  52. Yuanzhan Wang, Jing Liao, and Zhen Liu, “Service Life Prediction and Environmental Impact Evaluation of Recycled Aggregate Concrete with Supplementary Cementitious Materials,” Construction and Building Materials, vol. 395, pp. 1-16, 2023.
    [CrossRef] [Google Scholar] [Publisher Link]
  53. Wichian Chalee, Tieng Cheewaket, and Chai Jaturapitakkul, “Utilization of Recycled Aggregate Concrete for Marine Site based on 7-Year Field Monitoring,” International Journal of Concrete Structures and Materials, vol. 15, no. 1, pp. 1-11, 2021.
    [CrossRef] [Google Scholar] [Publisher Link]
  54. Valeria Corinaldesi et al., “Durability Assessment of Recycled Aggregate HVFA Concrete,” Applied Sciences, vol. 10, no. 18, pp. 1-14, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
  55. Yuanzhan Wang, Jing Liao, and Baohua Zhang, “A Review of Chloride Penetration of Recycled Concrete with Enhancement Treatment and Service Life Prediction,” Materials, vol. 17, no. 6, pp. 1-32, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
  56. Jiuwen Bao et al., “Effect of Loading-Induced Damage on Chloride Ingress Behavior of Recycled Aggregate Concrete: A Comprehensive Review,” Cement and Concrete Composites, vol. 141, pp. 1-15, 2023.
    [CrossRef] [Google Scholar] [Publisher Link]
  57. Kyuhun Kim, Myoungsu Shin, and Soowon Cha, “Combined Effects of Recycled Aggregate and Fly Ash Towards Concrete Sustainability,” Construction and Building Materials, vol. 48, pp. 499-507, 2013.
    [CrossRef] [Google Scholar] [Publisher Link]
  58. Weichao Hu et al., “A Laboratory Analysis of Chloride Ions Penetration in Recycled Aggregates Concrete Admixed with Ground Granulated Blast Furnace Slag,” IOP Conference Series: Materials Science and Engineering, vol. 611, no. 1, pp. 1-7, 2019.
    [CrossRef] [Google Scholar] [Publisher Link]
  59. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-19), American Concrete Institute, Farmington Hills, MI, 2019.
    [Google Scholar]
  60. ACI Committee 357, “Guide for the Design and Construction of Fixed Offshore Concrete Structures,” American Concrete Institute, 1987.
    [Google Scholar]
  61. BS EN 206:2013+A2:2021 - Concrete: Specification, Performance, Production and Conformity, Bsigroup, 2021. [Online]. Available: https://knowledge.bsigroup.com/products/concrete-specification-performance-production-and-conformity-2
  62. Japan Society of Civil Engineers, Standard Specifications for Concrete Structures: Design, JSCE, 2007. [Online]. Available: https://www.jsce-int.org/system/files/JGC15_Standard_Specifications_Design_1.0.pdf
  63. “Model Code for Service Life Design,” fib Bulletin, 2006.
    [CrossRef] [Publisher Link]
  64. ISO 14040:2006 - Environmental Management: Life Cycle Assessment: Principles and Framework, 2nd ed., ISO, 2006. [Online]. Available: https://www.iso.org/standard/37456.html
  65. ISO 14044:2006 - Environmental Management: Life Cycle Assessment: Requirements and Guidelines, 1st ed., ISO, 2006. [Online]. Available: https://www.iso.org/standard/38498.html
  66. EN 13670:2009 - Execution of Concrete Structures, European Committee for Standardization, 2009. [Online]. Available: https://standards.iteh.ai/catalog/standards/cen/030fcb2f-943c-4af0-b552-03e4af101831/en-13670-2009?srsltid=AU7gw4V5_tm6XiVnss1zu4JmCVoDEjmsqRj1Q2duwdnvRwT-SznXAWVU
  67. Nordtest Method, NT BUILD 492: Concrete, Mortar and Cement-based Repair Materials: Chloride Migration Coefficient from Non-Steady-State Migration Experiments, NORDTEST, 1999.
    [Google Scholar]
  68. ASTM C1556-11 - Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion, ASTM International, West Conshohocken, PA, 2016. [Online]. Available: https://store.astm.org/c1556-11ar16.html
  69. I-Cheng Cheng Yeh, “Modeling of Strength of High-Performance Concrete using Artificial Neural Networks,” Cement and Concrete Research, vol. 28, no. 12, pp. 1797-1808, 1998.
    [CrossRef] [Google Scholar] [Publisher Link]
  70. D. Dua, and C. Graff, “UCI Machine Learning Repository,” University of California, Irvine, 2019.
    [Google Scholar]
  71. ASTM C39/C39M-21 - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2021.
    [CrossRef] [Google Scholar] [Publisher Link]
  72. ASTM C1202-19 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, PA, 2019.
    [CrossRef] [Google Scholar] [Publisher Link]